Prices incl. VAT plus shipping costs
2,897.48€ netto (price without VAT)
Delivery time 10 Workdays
- Order number: DS-KMYGENIUS-Set-0009-AudiA38P-S3-S
Scope of delivery of the package:
- My Genius programming console
- USB connection cable
- USB data carrier with MyGenius client software
- DimSport standard programming cable OBD2
- Intake HFI Intake Gen.2 "Plus" for 2.0TFSI HGHFISPV01-E5
- HJS Downpipe 90951105
- Wagner Competition charge air cooler 200001034
- ChipTuning Audi A3 8P 2.0 TFSI, 200HP, EA113, Stage 3
Software optimization level 3:
270 hp, 410 NM, vMax open
Further information on tuning is available here
The MyGenius is a customer flasher that enables you as a customer to program your vehicle independently via the diagnostic connector (OBD socket).
All you have to do is install the software you have sent on your computer / notebook. Then connect the console to the OBD socket of your vehicle using the programming cable. You will be guided through the menu in simple steps to read out the engine software, send it to our programmer by e-mail and then re-tune the resulting tuning. And that as often as you like.
- High-quality, mobile flash tool
- Preservation of the security features of the series software
- Quick tuning without mechanical intervention, via the diagnostic connector (OBD) of the vehicle
- Intuitive menu guidance and simple operation
|HJS NO.||DESCRIPTION||ENGINE TYPE||EURO-NORM|
|90 95 1105||Front pipe 70 mm||AXX / BWA / BWJ / BYD / BYT / BZB / CAWB / CCZA / CCZB / CDAA / CDLA / CDLC / CDLD / CDLG||Euro 4/5|
Only suitable for models with front wheel drive!
- exactly like the series part
- Two 200 CPSI Tuning Catalysts from HJS
- Exhaust-proof high-performance Flexst ck
- ECE approval
- HJS nameplate with ECE approval no.
- Ideally suited as a basis for earlier performance levels
- Made in Germany
- low exhaust back pressure
- fast discharge of the exhaust gases
- lower exhaust gas temperature; protects the engine, loader and crane
- streamlined optimized
- better response of the turbocharger
- Power increase up to 10 kW (14 hp)
- Soundplus up to 2 dB
- Plug and play
- EOBD tested
- Stainless steel catalyst
- Euro 4/5 approval
- HJS Downpipe with Sportkat
- Extension tube
- Reduction 70/60 mm
- three bells
The Competition Charging Air Compressor has the following net sizes (610mm x 440mm x 65mm / 17.45L) and thus offers a 10% larger air intake and 50% more charge air volume compared to the original Audi S3 Charge Air Charger. The newly developed competition high-performance net gives the adjoining components, such as eg. the water meter, still sufficient airflow and is also still very light (S3 OEM 8kg / Wagner tuning 9.2kg). CAD-developed free-form end caps made of cast aluminum for the best possible internal air flow. The inlet and outlet have been enlarged (67mm), so this kit comes with matching silicone tubes. Overall, this charge air cooler has far less counterpressure than the standard bulb. In addition, all our intercoolers have an anti-corrosion coating with thermal conductivity. This guarantees optimal cooling with a significant increase in performance. Installation is carried out by replacing the OEM charge air sampler and is easy to carry out. All our products are subject to constant qualitative monitoring. From now on with TV Teilegutachten for many vehicles available.
HFI Carbon Air Intake Kit Generation 2 "Plus" with Pipercross Sport Air Filter for VAG 2.0 TFSI Transverse Engines
This Intake Kit replaces the complete engine cover including the air filter and the intake funnel.
Already during the disassembly of the original parts you will notice that the original intake funnel is restrictive.
The improved airbox of the HFI Gen.2 "Plus" Intake System offered here is made of carbon fiber and has a special, specially developed DRY Pipercross air filter, which is not oiled and thus does not damage the air mass meter. In addition, unlike the more traditional Gen.2 HFI Air intake, this "plus" intake achieves an increase in power of up to 8PS and 15NM of torque in previously uprated engines, with no need for software optimization. (Depending on software optimization)
For upgraded vehicles, we also recommend the use of an additional heat shield for the crane. (optionally available)
The connection between the airbox and the turbocharger is provided by a generation 2 HF-Series intake manifold, which optimizes the intake air duct, enhances the sound of the supercharger and visually enhances the engine compartment.
Please note :
Golf 5 GTI Edition 30 or Pirelli models require conversion to S3 SUV technology.
Attention ! The Seat Leon 1P, as well as Skoda Octavia models, the original hood holder must be removed.
Pipercross filter: air flow of 489cfm
- Generation 2 "Plus" Carbon Airbox
- Pipercross "Dry" sport air filter
- HF-Series Gen.2 intake manifold
- mounting material (clamps, adapters, etc ....)
A partial report for entry after 19.3 is included.
For additional information about this product please contact us!
Please note: Connecting the MyGenius to the diagnostic port will result in the initialization of the console to the chassis number of your vehicle. A return is then no longer possible!
Important notice: This is an automatic translation. Please note that only the original german description is valid for a legally purchase agreement.