Prices incl. VAT plus shipping costs
Delivery time 7 Workdays
- Order number: DS-KMYGENIUS-Set-0015-3.0TFSI
Scope of delivery of the package:
- My Genius programming console
- USB connection cable
- Standard programming cable OBD2
- Forge Compressor Wheel (Pulley) Set for VAG 3.0 TFSI engines,
- ChipTuning VAG 3.0 TFSI V6, Level 3
- NGK spark plugs colder heat degree
Software optimization level 3:
450 hp, 560 NM, vMax open
Further information on tuning is available here
The MyGenius is a customer flasher that allows you as a customer to program your vehicle independently via the diagnostic connector (OBD socket).
All you have to do is install the software that has been sent to your computer / notebook. Then connect the console to the OBD socket of your vehicle using the programming cable. You will be guided through the menu in simple steps to read out the engine software, send it to our programmer by e-mail and then re-tune the resulting tuning. And as often as you like.
- High-quality, mobile flash tool
- Preservation of the security features of the series software
- Quick tuning without mechanical intervention, purely via the diagnostic connector (OBD) of the vehicle
- Intuitive menu navigation and simple operation
Forge Compressor Wheel (Pulley) Set for VAG 3.0 TFSI engines, FMSCPS53T
In addition to chiptuning, the VAG 3.0 TFSI engine also offers a compressor conversion. Here, a compressor wheel (Pulley) is used with a smaller diameter. The faster rotation of the compressor wheel increases the torque in the lower rpm range. The response of the vehicle is significantly improved. A new V-belt is included. In combination with chip tuning, the VAG 3.0 TFSI engine can achieve a performance increase of approx. 30HP.
Made in England
Produced from high quality stainless steel
approx. 30hp additional power in combination with other modifications (see below)
Suitable for the following vehicles:
Audi A4 / S4 / A5 / S5 B8 - 3.0 TFSI - 272 hp / 333 hp
Audi A6 / A7 4G - 3.0 TFSI - 300 hp / 310 hp / 333 hp
Audi A8 4H - 3.0 TFSI - 290 hp / 310 hp / 333 hp
Audi Q5 / SQ5 8R - 3.0 TFSI - 272 hp / 354 hp
Audi Q7 4L - 3.0 TFSI - 272 hp / 280 hp / 333 hp
Porsche Cayenne 92 A - 3.0 S E-Hybrid - 333 hp / 416 hp
Porsche Panamera 970 - 3.0 S / 4S - 420 hp
Porsche Macan 95B - 3.0 S - 340 hp
CAKA, CCBA, CGWA, CGWB, CGWC, CGWD, CGXA, CGXB, CGXC, CHMA, CJTB, CJTC, CJWC, CJWE, CMDH, CMUA, CNAA, CREA, CREC, CRED, CREG, CTDA, CTTA, CTUA, CTUB, CTUC, CTUD, CTVA, CTWA, CTWB, CTXA, M06.EC, MCG.E, MCG.EA, MCG.FA, MCT.MA, MCW.DA
Special Iridium spark plugs for all 3.0L TFSI V6 engines from NGK with a colder heat rating than standard.
It is with the TFSI engine necessarily make sure that these NGK candles are installed and not those of other manufacturers!
We recommend these spark plugs after the 3.0 TFSI Pulley Upgrade (see accessories).
For high performance engines with high compression and high boost pressure, the electrode spacing should be 0.65mm.
During installation, please note:
Spark plugs with a colder value result in a shorter change interval of 16,000-24,000 km. The manufacturer's instructions must be observed.
Technical specifications of the manufacturer:
Spanner size: 16 mm
Thread diameter: 14.0 mm
Thread length: 19.0 mm
Resistance: suppressed, 5 KOhm
For additional information about this product, please contact us!
Please note: Connecting the MyGenius to the diagnostic port will initialize the console to the chassis number of your vehicle. A return is then no longer possible!
Important notice: This is an automatic translation. Please note that only the original german description is valid for a legally purchase agreement.