Charging air kit for Audi A4, A6 1.8T B5 C5 + Passat 3B

- Charge air cooler Alu Netzma LxBxH 460x240x50mm (total dimensions 645x240x50mm)

- 2 pieces aluminum tubes 51mm outer diameter

- 5 pieces of silicone pads

- 2 holders

- 10 clamps

- with Map-Sensor connection or without specify when ordering.

- see also photo

suitable for:

- Audi A4 B5 1.8T 150-180PS AEB / APU / ANB / AWT / AJL

- Audi A6 C5 1.8T 150-180PS AEB / APU / ANB / AWT / ARK / AJL

- Passat 3B 1.8T 150PS AEB / APU / ANB

not for vehicles with air conditioning

Description:

The charge air kit is between   Turbocharger and   Intake manifold   installed. It is suitable for the above vehicles. The goal of a charge air cooler is to cool down the air warmed by the turbocharger. By cooling down the compressed air, more air mass enters the combustion chamber at the same volume, and more fuel can be burnt, thereby increasing performance and efficiency. The lower the charge air is the lower is the thermal load of the engine, the turbocharger because it requires less speed ben same air mass. Also, the fuel consumption is lowered and the engine gets slightly better exhaust emissions, provided the Steuerger t is adapted to it. It is important to make sure that the intercooler gets as much airflow as possible. The LLK Kit offered here is made entirely of aluminum with cast boxes, has 4 attachment points and a bar`n plate net. It is a performance up to 350PS m possible. Ideal for motorsport and tuning. Each intercooler is tested to 5 bars before delivery.