Forge Charging Kit Kit BMW F80-82-83 M3 / M4 - BMW M3 F80, FMCC1

1,989.40€ *
2,030.00€ * (2% Saved)

Prices incl. VAT plus shipping costs

Delivery time 10 Workdays

  • FM-FMCC1
This Forge BMW M3 / M4 S55 intercooler (also suitable for the M2 Competition F22 2018-) uses a... more
Product information "Forge Charging Kit Kit BMW F80-82-83 M3 / M4 - BMW M3 F80, FMCC1"

This Forge BMW M3 / M4 S55 intercooler (also suitable for the M2 Competition F22 2018-) uses a surge tank instead of a surge tank like the OEM system. At the highest point of the charging radiator is a filler cap that allows you to ensure that the charge is 100% full of coolant and has no air bubbles. This maximizes the efficiency of the heat transfer of the coolant in the charge cooler water jacket.

This intercooler has a full aluminum construction that overcomes all problems associated with splitting the plastic end tank, high boost pressure failure and leakage. The end tanks are made from high-precision laser-cut sheets that are TIG-welded by hand for maximum strength and durability.

Designed and manufactured at Forge Motorsport headquarters in Gloucestershire, England, we used our Solidworks CAD design system to support the creation, modification, Computational Fluid Dynamics (CFD) analysis and optimization of this innovative intercooler. Forge Motorsport's development engineers have developed a four-pass design that allows water to flow through four passes of the cooler, outperforming cooling efficiency compared to other products currently on the market.

This intercooler offers a volume increase of over 71% and an increase of the frontal area of over 42%.
In hot climatic tests, constant test bench runs compared to the standard system showed significantly lower inlet temperatures and a performance increase of up to 20 BHP.
As part of Forge Motorsport's rigorous quality control, each charging chiller unit is carefully inspected before shipping and tested for 4BAR pressure.
At the outlet of the charging cooler there is also a 1/8 NPT connection, via which water / methanol can be injected if required.
This replacement reservoir and charging radiator uses the existing OEM charge radiator rubber bearings, which isolate the system from the engine's heavy vibration.

Included:

1x intercooler unit
1x reservoir
1x reservoir cap
1x radiator cap
1x radiator cap cover
1x blind cap
1x 1/8 NPT grub screw
7x M6x12mm hexagon socket screws
7x 6mm washers
1x hexagon socket screw M8x20mm
1x 8mm washer
1x M8 Nyloc mother
3x 8-16mm hose clamps
1 x 8mm ID vacuum hose x 170mm
1x 8mm ID vacuum hose x 750mm

Not admitted in the area of STVO.



Important notice: This is an automatic translation. Please note that only the original german description is valid for a legally purchase agreement.
Related links to "Forge Charging Kit Kit BMW F80-82-83 M3 / M4 - BMW M3 F80, FMCC1"