Products from TurboPerformance

TurboPerformance
Close filters
 
from to
 
7 From 12
No results were found for the filter!
- Pop-off piston valve alu
Delivery: - closed pop-off valve Suitable for: - All vehicles with air mass meter drive eg 1.8T, VR6, R32 etc. Important notice: This is an automatic translation. Please note that only the original german description is valid for a...
51.28€ *
- Intake manifold 1.8T - Integrated Engineering
1.8T intake manifold for all transversely mounted 1.8T engines. They expect k can gro e increases when you bridge your original Ansaugrb exchange against the IE. The factory bridge is sufficient for the air supply into the engine duct to...
Content 1 Stück
1,011.50€ *
- Deactivation of noise enhancer GV-Fix, VAG TFSI, aluminum, for Golf 5 / Golf 6 GTI, colorless...
Deactivation of high-pitched resonance tube Golf 5 / Golf 6 After modifications to the turbocharger or the exhaust system, the noise in the engine compartment is often so loud that it also becomes too loud in the passenger compartment...
19.85€ *
Hint!
- BMW N54 PCV valve, upgrade version
A serious weakness of the N54 engine is the original PCV valve. Due to the loose fit, it can not withstand high pressures. By wearing the valve, the boost pressure can escape into the Kurbelwellengeh housing. The original PCV valve may...
39.00€ *
Hint!
- BMW N55 135i / 335i, E82 / E88 / E90 / E91 / E92 / E93 Boost Pipe, 13717599293
The Boost Pipe is the connecting pipe between the charge air cooler and the turbocharger. This intake manifold made of aluminum ensures an increased air supply to the turbocharger. It replaces the factory plastic pipe. For vehicles with...
133.28€ *
Hint!
- BMW N55 F20 / F30 M135i / M235i / 335i / 435i Boost Pipe, 13717602652
The Boost Pipe is the connecting pipe between the charge air cooler and the turbocharger. This intake manifold made of aluminum ensures an increased air supply to the turbocharger. It replaces the factory plastic pipe. For vehicles with...
139.00€ *
Hint!
-  lthermostat adapter screw N54 / N55 E-models, to install a temperature gauge
This adapter screw is suitable for the installation of a ltemperatur- or a ldruckanzeige. The OEM screws often cause leaks. Loose spots in the vicinity of the filter housing are the result. With this replacement screw you can avoid...
13.33€ *
Hint!
- Mercedes Benz AMG, A45 / CLA45 / GLA45 Boost Pipe / Charge Pipe
This aluminum tube replaces the factory plastic tube. For vehicles with a boost in performance, the increased boost pressure can cause the original pipe to burst. In the worst case, this defect can lead to engine damage due to sucked...
190.40€ *
- USB stick blue, 4GB
USB stick engraved blue with TurboPerformance logo, 4GB Important notice: This is an automatic translation. Please note that only the original german description is valid for a legally purchase agreement.
7.98€ * 7.99€ *
Hint!
- BMW B58 140i, 240i, 340i, 440i, 740i F20-F23, F30-F36, G11-G12 Charge Pipe, also xDrive 13718601684
This aluminum tube replaces the factory plastic tube. For vehicles with a boost in performance, the increased boost pressure can cause the original pipe to burst. In the worst case, this defect can lead to engine damage due to sucked...
266.56€ *
7 From 12