Prices incl. VAT plus shipping costs
Delivery time 10 Workdays
- Order number: AM-DataDisplay-E6
The new frames, manufactured by injection molding, are now available for this model.
Installation E63 / E64 slightly different from installation instructions E60 / E61.
Please tell us when placing your order the last 7 digits of the FIN (vehicle identification number).
The DataDisplay E60 / E61 includes:
- Display 3.2 inches incl. Frame
- 1x USB cable for updating
- Cable set for connection to the vehicle
- display cable
- 2x socket housing for rewinding the necessary cables to the vehicle
- Registration Key
ATTENTION: Please inform yourself if the DataDisplay is also compatible with your vehicle!
Optional external oil temperature sensor for diesel vehicles:
On some diesel models of the E series, the oil temperature can also be displayed without a sensor.
We therefore recommend reordering the sensor if necessary (to find under spare parts) and to see first if this is necessary at all.
The functions / displays / options as a whole:
(Depending on the engine, the functions vary)
- Automatic / Manual brightness control
- Full graphic touch display with 65536 colors
- Boat image freely changeable
- OBD2 blocker function (only unlockable via freely selectable code!)
- Release diagnosis (OBD2) via the disabling function of the DataDisplay
- Color setup freely adjustable (from when eg oil temperature red, yellow and green is displayed)
- Torque adjustment (should the real value not correspond to that in the engine control)
- Read and clear motor fault memory
- Shift light adjustable (display via picture on the DataDisplay and / or indicator in the instrument cluster)
- Save / reset the maximum values
- Save and start with the last page
- Delete - R (F-series suppress the KAT warning)
- Speed (adjustment via GPS So time measurements are very accurate)
- water temperature
- oil temperature
- Transmission temperature (on all vehicles with automatic or DKG - E-series and F-series!)
- battery voltage
- Boost pressure (actual value)
- Boost pressure (target value)
- Charge pressure actuator position (wastegate position)
- Charge air temperature (IAT)
- air mass
- firing angle
- Injection time
- lambda value
- rail pressure
- fuel pressure
- Exhaust gas temperature (calculated)
- Oil pressure (F-series or E-series with external sensor)
- DPF differential pressure
- Pressure before DPF
- Soot mass DPF
- Oil ash DPF
- Dangerous route since the last successful regeneration DPF
- Time measurements 0-100 (with switching time display with manual switching)
- Time measurements 100-200 (with switching time display with manual switching)
- Time measurements 1/4 Mile (including display of average acceleration) (with switching time display with manual switching)
- Time measurements 1/2 Mile (including display of average acceleration) (with switching time display with manual switching)
- Time measurements 1/8 Mile (including display of average acceleration) (with switching time display with manual switching)
- Freely selectable speed or time measurement.
- Lap time (display distance and time) (with switching time display with manual switching)
- G-force display
- Soundtuning switch ("banging / bubbling" - F-series function)
- Active sound design switch (engine sound from the speakers - F-series function)
- Exhaust door control
- Tacho needles knock out with ignition
- Optionally connectable sensors (oil temperature, oil pressure, exhaust gas temperature, ...)
- Dashboard with 8 freely selectable values (water and oil temperature fixed above)
- DSC / DTC switchable on request with the vehicle starting (E-series function)
- Relay control: 4 relays can be controlled with which you can control pumps, injections, etc.
- Compensated scaled maps for N54 engines (boost pressure> 1.5 bar)
- Switching the language and units (English, German, Italian, French, Dutch, on request other units like Bar-PSI, PS-KW, Lambda-AFR, Â° C- Â° F, etc ...)
- Save the last 4 times (all time measurements)
- Up to 4 freely selectable parameters to display in a run diagram
- Freely selectable values displayed as value and bar graph (Up to 3 pieces)
- Continuous development of functions and styles.
Important notice: This is an automatic translation. Please note that only the original german description is valid for a legally purchase agreement.