Products from Verschiedene
No results were found for the filter!
Reduction 60/76 mm, L 180 mm, stainless steel, double socket, 90605732 transition from 76 mm internal diameter to 60 mm internal diameter both sides slotted 4 times for a better screw connection Total length 180 mm Important notice: This is an automatic translation. Please note that only the original german...
29.71€ *
2.0 TFSI TTS intake in connection with Airbox Delivery: TTS intake manifold connecting hose TTS air mass meter HFI Carbon BOX rubber fender with clamp replacement HFI V.2 "Plus" Carbon Airbox stock for VAG models air filter The engine cover is not included. You will find...
830.00€ *
2.0 TFSI Conversion Kit on Performance Pump Our professional performance lpumpenset is suitable for all 2.0 TFSI engines with timing belts. The balance shafts (oil pump) of the 2.0 TFSI engines are very susceptible. The conversion to the performance pump eliminates the balancer...
549.00€ *
Hint!
RS3 injector complete set 2.0 TFSI, up to 450hp RS3 injectors, suitable for the 2.0 TFSI engine. This can achieve a power up to 450PS. These nozzles have 20% more flow than the original S3 D sen. The complete extraction of the power takes place with the help of the TurboPerformance...
799.68€ *
Injector complete set 2.0 TFSI (S3) Audi S3 injectors, suitable for all VAG 2.0 TFSI engines. The nozzles can also be used after conversion to a K04 turbocharger (see accessories). The complete extraction of the power takes place with the help of the TurboPerformance...
858.95€ *
Hint!
KS Tools Schabmeissel, 2.5 x 32mm, for opening control units, stainless steel, 907.2212 Handy tool for opening Steuerger th. Properties: continuous, regrindable stainless steel blade with attachment se with striking cap at the end of the handle with ergonomically shaped 2-component handle good for use at extremely low...
15.17€ *
Hint!
KS Tools Schabmeissel, 1.2 x 32mm, for opening control units, stainless steel, 907.2211 Handy tool for opening Steuerger th. Properties: continuous, regrindable stainless steel blade with attachment se with striking cap at the end of the handle with ergonomically shaped 2-component handle good for use at extremely low...
12.17€ *
Reduction 70 / 60.3 mm, L 150 mm, stainless steel, single socket transition from 70 mm outer diameter to 60.2 mm inner diameter 60 mm side slotted 4 times for a better screw connection 70 mm side unslotted for insertion into a pipe Total length 150 mm Important notice: This is an automatic...
21.30€ *
Reduction 60/71 mm, L 180 mm, stainless steel, double socket transition from 71 mm internal diameter to 60 mm internal diameter both sides slotted 4 times for a better screw connection Total length 180 mm Important notice: This is an automatic translation. Please note that only the original german...
21.42€ *