Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
from to
13 From 20
No results were found for the filter!
- Digital Port Cable (GPT) for Dimsport Trasdata, F34NTA15
The Digital Port Cable allows the connection of the two GPT signals directly to the plug of the ECU. It is equipped with two additional cables to connect ECUs with dual CAN buses. This is required for the following controllers: BMW...
23.80€ *
- DimSport Tractor Deutz / Same programming cable 14 pin, F32GN064, 144300K232
Tractor diagnostic cable for NewGenius. Connection to the 14-pin Deutz / Same diagnostic system Alternative to Alientech KESSV2 cable 144300K232 Important notice: This is an automatic translation. Please note that only the original...
65.45€ *
- Dimsport motorcycle MV Augusta programming cable, 4 pin, F32GN063, 144300K258
Special cable for programming MV Augusta Motorcycles ELDOR over Can Line, 4-pin Alternative to Alientech KESSV2 cable 144300K258 Important notice: This is an automatic translation. Please note that only the original german description is...
46.41€ *
- Dimsport Trasdata Board for RENESAS ECU s with M32, M32R, M32Rx CPU
Dimsport NewTrasdata add-on module for the programming of motorcycle control units Important notice: This is an automatic translation. Please note that only the original german description is valid for a legally purchase agreement.
71.40€ *
- DimSport Trasdata connection cable F32GN038 for MEDC17 probe
DimSport Trasdata connection cable F32GN038 for MEDC17 probe Important notice: This is an automatic translation. Please note that only the original german description is valid for a legally purchase agreement.
23.80€ *
- Mini Probe F34DM005
only to be used with adapter F34DM003 Important notice: This is an automatic translation. Please note that only the original german description is valid for a legally purchase agreement.
83.30€ *
- DimSport Trasdata OBDII / CAN2.0, F34NTA14
Special cable for reading car BMW TP8 via NewTrasdata. It can be checked via OBD whether the existing control unit of the BMW TP8 series can be programmed. Before the boot mode, it can also be used to read out the password. ATTENTION:...
35.70€ *
Hint!
- DimSport DSG DQ 500 programming cable (16-pin), F32GN056, 144300K259
for gearbox control unit, 16-pin connector Only with this programming cable can DQ 500 controllers be read and programmed. With Dimsport Genius or Alientech Kess the software can be read directly on the gearbox control unit. K-Line and...
130.90€ *
- Probe adapter F34DM003 - Cartridge for miniature probes
Base board for Siemens + Marelli MPC5xx terminal adapters Important notice: This is an automatic translation. Please note that only the original german description is valid for a legally purchase agreement.
83.30€ *
- Mini probe F34DM004
only to be used with adapter F34DM003 Important notice: This is an automatic translation. Please note that only the original german description is valid for a legally purchase agreement.
83.30€ *
13 From 20