+++ BLACKED FRIDAY - BIS ZU 30% RABATT - NOCH BIS MO. 30.11. +++
Close filters
 
  •  
  •  
  •  
  •  
from to
1 From 2
No results were found for the filter!
Hint!
- BNP position frame for NewTrasdata, CMD, X17...
This set is suitable for reading / programming control devices and can be used in conjunction with a positioning frame. The LED lighting makes it easier to find and pick up the contacts. Delivery: Alu BNP plexiglas holder Perspex pane...
96.50€ *
Hint!
- Dimsport 4 Needle Tips for BNP Needles, K34ACD_02
4 replacement needle tips for BNP styli. Compatible with Dimsport styli K34ACD_01 (see accessories). Important notice: This is an automatic translation. Please note that only the original german description is valid for a legally...
44.08€ *
- 5 spring contact pins / styli for BDM frame...
Anpin Kit, consisting of 5 spring contact pins. This kit can be used with the TurboPerformance BDM frame. Delivery: 4 spring contact pins with wire connection 1 spring contact pin for tapping with the alligator clip Important notice:...
77.20€ * 96.50€ *
Hint!
- Dimsport BNP position frame for NewTrasdata...
This set is suitable for reading / programming control devices and can be used in conjunction with the positioning frame K34DIMA. Delivery: BNP plexiglas holder 4 spring contact pins The illustrations show equipment in use (not...
290.00€ *
- Dimsport BDM position frame, K34DIMA
BDM position frame for Dimsport NewTrasdata master and slave, with metal plate to support the device. The positioning frame consists of steel and aluminum precision rails to allow accurate working. The massive base plate guarantees a...
359.60€ *
Hint!
- Dimsport 4 styli for BNP position frame,...
4 massive styli for use with the BNP position frame from Dimsport. The illustrations show equipment in use (not included). Important notice: This is an automatic translation. Please note that only the original german description is valid...
114.84€ *
- Alientech Anpin Kit for BDM frame, illuminated,...
EVO Anpin Kit with illuminated holder and spring contact pins. This kit can be used as an extension of any standard frame. The illustrations show equipment in use (not included). Delivery: 1 Plexiglas holder illuminated 4 spring contact...
125.75€ *
- Complement kit BMW EDC17 for drilling template
Complement kit Bosch EDC17 BMW for Drill template MED17.7.3 - Tuning without opening the control unit With this extension kit for the MED17.7 drilling rig, the BMW EDC17 control unit no longer has to be opened for tuning. Through a small...
394.40€ *
- Mercedes Benz Control Unit Drilling Template...
Drilling template Bosch MED17.7 Mercedes Benz - Tuning without opening the control unit With this drilling device, the control unit MED17.7 no longer needs to be opened for tuning. Through a small hole, the bootpin is exposed. This is...
719.20€ *
- Acrylic boot pin holder with spring pin, Anpin...
The tip of the antistatic boot pin holder made of acrylic contains a spring-loaded test needle, on the underside are three high-performance magnets positioned. This Bootpinhalter has a firm hold on the retaining rail and is freely...
9.28€ * 11.60€ *
1 From 2