No results were found for the filter!
Hint!
Upgrade fuel pump tank pump TFSI / TSI FWD / AWD, 1K0 919 051 Upgrade fuel pump for 2.0 TFSI EA113 (year 2008-2013), 2.0 TSI EA888 engines (until BJ 2013) Power up to 550hp possible Drop-in Intank variant No additional tax Old pump caps and fuel gauge need to be taken. Attention! Suction jet cap...
399.00€ *
LOBA HP25 high pressure pump Audi 2.5TFSI, TTRS, RS3, RS Q3 Loba Motorsport HPFP high pressure fuel pump for 2.5 TFSi Properties: - Specific 2.5 TFSI fuel pump - Maximum pressure: 175 bar - Perfect for 450 hp + setups on 2.5 TFSI engine - Harware included - Simple direct screwing Important...
795.00€ *
LOBA HP20 High Pressure Pump 2.0TFSI (EA113) Loba Motorsport HPFP high pressure fuel pump for 2.0 TFSi (EA113) Specific to 2.0 TFSI EA113 (Leon Cupra, Golf 5 GTi / Golf R, S3 8P etc.) Max pressure: 175 bar Perfect for 340 hp + setups on the 2.0 TFSI engine Hardware included Simply...
Content 1 Stück
775.00€ *
Injector Bosch 550ccm - 5 pcs Delivery: - 5 injectors original Bosch 550ccm at 3 bar high impedance Technical specifications: - 550cc / min at 3 bar - 12 ohms - Length O-ring to O-ring beginning 60mm - thick design EV14 - USCAR plug Suitable for: - For many German...
399.00€ *
Pop-off piston valve alu Delivery: - closed pop-off valve Suitable for: - All vehicles with air mass meter drive eg 1.8T, VR6, R32 etc. Important notice: This is an automatic translation. Please note that only the original german description is valid for a...
51.28€ *
Intake manifold 1.8T - Integrated Engineering 1.8T intake manifold for all transversely mounted 1.8T engines. They expect k can gro e increases when you bridge your original Ansaugrb exchange against the IE. The factory bridge is sufficient for the air supply into the engine duct to...
Content 1 Stück
1,011.50€ *
Tial MV-R 44mm TIAL MVR external wastegate with water cooling for turbo engines up to approx. 600hp. The MV-R Tial Wastegate has a valve with a diameter of 44mm. Both the housing and the valve are made of 347SS stainless steel to withstand the highest...
429.00€ *
Tial MV-S 38mm TIAL MV-S external wastegate with watercooling for turbocharged engines up to approx. 600hp. The MV-S Tial Wastegate has a valve with a diameter of 38mm. Both the housing and the valve are made of 347SS stainless steel to withstand the...
319.00€ *
TIAL Q 50mm Blow off TIAL BV 50 Q The BV 50 Q Tial Blow off valve has a valve diameter of 50mm and is the largest TIAL version available in the open version. The Tial BV50 Pop Off valve is made of 6061 aluminum CNC Made and ensures by its high quality for...
259.00€ *
TIAL QR 50mm blow off TIAL BV 50 QR The BV 50 QR Tial Blow off valve has a valve diameter of 50mm and is the largest TIAL version available in the closed version suitable for air mass meter. The Tial BV50 Pop Off valve is made of 6061 aluminum CNC Made and...
259.00€ *