No results were found for the filter!
VAG pressure relief valve 135bar Pressure relief valve for TFSI engines , for large turbo or K04 tuning . This part should be installed when the vehicle more fuel requests d jerk as de r standard- fuel pressure regulator can handle. Important notice: This is an...
69.00€ *
LOBA HP25 high pressure pump Audi 2.5TFSI, TTRS, RS3, RS Q3 Loba Motorsport HPFP high pressure fuel pump for 2.5 TFSi Properties: - Specific 2.5 TFSI fuel pump - Maximum pressure: 175 bar - Perfect for 450 hp + setups on 2.5 TFSI engine - Harware included - Simple direct screwing Important...
795.00€ *
Injector Bosch 550ccm - 5 pcs Delivery: - 5 injectors original Bosch 550ccm at 3 bar high impedance Technical specifications: - 550cc / min at 3 bar - 12 ohms - Length O-ring to O-ring beginning 60mm - thick design EV14 - USCAR plug Suitable for: - For many German...
399.00€ *
Tial MV-R 44mm TIAL MVR external wastegate with water cooling for turbo engines up to approx. 600hp. The MV-R Tial Wastegate has a valve with a diameter of 44mm. Both the housing and the valve are made of 347SS stainless steel to withstand the highest...
429.00€ *
Tial MV-S 38mm TIAL MV-S external wastegate with watercooling for turbocharged engines up to approx. 600hp. The MV-S Tial Wastegate has a valve with a diameter of 38mm. Both the housing and the valve are made of 347SS stainless steel to withstand the...
319.00€ *
TIAL Q 50mm Blow off TIAL BV 50 Q The BV 50 Q Tial Blow off valve has a valve diameter of 50mm and is the largest TIAL version available in the open version. The Tial BV50 Pop Off valve is made of 6061 aluminum CNC Made and ensures by its high quality for...
259.00€ *
TIAL QR 50mm blow off TIAL BV 50 QR The BV 50 QR Tial Blow off valve has a valve diameter of 50mm and is the largest TIAL version available in the closed version suitable for air mass meter. The Tial BV50 Pop Off valve is made of 6061 aluminum CNC Made and...
259.00€ *
Hint!
Airbox / Intake INJEN Evolution Golf 7 GTI / 7R / Audi S3 / Leon Cupra / Octavia RS, 2.0TSI T V This INJEN Technology suction system is made of high density, rotationally compressed, high density polyethylene. The intake box offers enough space for the largest possible filter insert. The used Super Nano filter has a microfibre...
530.01€ *
HF-Series VAG 1.8/ 2.0 T(F)SI Euro 6 EA888 Gen. 3, mit TÜV VAG 1.8 / 2.0 TSI Euro 6 Turbo Outlet Pipe / pressure tube to the LLK Due to the standard rejuvenation of the charge air system between the turbocharger and the intercooler, the HF-Series has developed the Turbooutlet Pipe especially for...
259.00€ *
Hint!
Forge turbocharger heat protection for IS38 Golf 7 GTI, Golf 7 R, Audi A3 S3 8V, 2.0 / 1.8 TSI... Forge heat protection "Pampers" until 1000 (short term until 1260) Kevlar / Titanium fiber multi-layer protection Optimal for tuning, motorsport and standard road use. Due to this heat protection, the turbocharger reaches the...
170.41€ *