No results were found for the filter!
Hint!
Rental tool Forge for the assembly of the compressor wheel (Pulley) for VAG 3.0 TFSI Forge special tool for the assembly of the 3.0. TFSI Pulleys, rental for 5 business days . The fee of use is 50 euros. The deposit of EUR 189.90 will be refunded after the return of the tool. If the tool is needed for more than 5 working...
239.90€ *
Hint!
Forge Compressor Wheel (Pulley) Set for VAG 3.0 TFSI engines, FMSCPS53T In addition to chiptuning, the VAG 3.0 TFSI engine also offers a compressor conversion. Here, a compressor wheel (Pulley) is used with a smaller diameter. The faster rotation of the compressor wheel increases the torque in the lower...
From 249.90€ *
Hint!
Screw connection for tubes / tubes, 22mm diameter, aluminum Adapter connection for tubes with 22mm diameter. This nozzle can be used for silicone tubes and plastic tubes. The pipe is provided with an opening. The nozzle is then pushed through from the inside and fixed from the outside with the...
24.89€ *
Hint!
Gasoline high pressure pump complete set for 2.0L TSI (VAG) EA888 Gen3 A high performance gasoline pump is the key component for effective tuning on the TSI engine! The original petrol pump is already in the serial state of the vehicle close to its performance limit! Until now, this problem had to be...
825.00€ *
Hint!
BMW N55 F20 / F30 M135i / M235i / 335i / 435i Boost Pipe, 13717602652 The Boost Pipe is the connecting pipe between the charge air cooler and the turbocharger. This intake manifold made of aluminum ensures an increased air supply to the turbocharger. It replaces the factory plastic pipe. For vehicles with...
139.00€ *
Hint!
BMW N55 135i / 335i, E82 / E88 / E90 / E91 / E92 / E93 Boost Pipe, 13717599293 The Boost Pipe is the connecting pipe between the charge air cooler and the turbocharger. This intake manifold made of aluminum ensures an increased air supply to the turbocharger. It replaces the factory plastic pipe. For vehicles with...
133.28€ *
Hint!
Mercedes Benz AMG, A45 / CLA45 / GLA45 Boost Pipe / Charge Pipe This aluminum tube replaces the factory plastic tube. For vehicles with a boost in performance, the increased boost pressure can cause the original pipe to burst. In the worst case, this defect can lead to engine damage due to sucked...
190.40€ *
Replacement filter for Racingline VWR R600 Airbox, for MQB 2.0 and 1.8 TSI with EA888 Gen3,... TRIFOAM® FILTER UNIT Faster, for longer The highest airflow of all filter types, for the best possible power for more of the time. As a high performance part, regular maintenance is essential to keep it at its very best. TRIFAOM FILTER:...
126.11€ * 134.55€ *
Sealing ring for R600 High Flow Turbo 90, replacement O-ring Replacement O-ring for the High Flow Turbo 90 intake pipe from Volkswagen Racing. Suitable for the newer version with two sealing rings. Important notice: This is an automatic translation. Please note that only the original german...
2.49€ * 2.99€ *
Turbocharger heat protection Black T4 for GARRETT GT40 GT42 GT45 GTX also Heat protection "Pampers" ceramic up to 1200 ° in black consists of several layers - ideal for tuning, motorsport as well as mass production use. Through this heat protection, the turbocharger reaches the operating temperature...
51.19€ *