No results were found for the filter!
GTX2860R gene 2 On the compressor side: Inlet: 46 mm Outlet: 60 mm Trim: 58 A / R: 0.60 Turbine side: Inlet: 54 mm Outlet: 47 mm Trim: 76 A / R: 0.72 Power: 200 - 475 Application: 1.4L - 2.5L About the Garrett GTX Series turbocharger The Garrett GTX...
From 1,530.00€ *
GTX2867R gene 2 On the compressor side: Inlet: 50 mm Outlet: 67 mm Trim: 55 A / R: 0.60 Turbine side: Inlet: 54 mm Outlet: 47 mm Trim: 76 A / R: 0.72 Power: 275 - 550 Application: 1.4L - 2.5L About the Garrett GTX Series turbocharger The Garrett GTX...
From 1,610.00€ *
Hint!
Upgrade fuel pump tank pump TFSI / TSI FWD / AWD, 1K0 919 051 Upgrade fuel pump for 2.0 TFSI EA113 (year 2008-2013), 2.0 TSI EA888 engines (until BJ 2013) Power up to 550hp possible Drop-in Intank variant No additional tax Old pump caps and fuel gauge need to be taken. Attention! Suction jet cap...
399.00€ *
LOBA HP25 high pressure pump Audi 2.5TFSI, TTRS, RS3, RS Q3 Loba Motorsport HPFP high pressure fuel pump for 2.5 TFSi Properties: - Specific 2.5 TFSI fuel pump - Maximum pressure: 175 bar - Perfect for 450 hp + setups on 2.5 TFSI engine - Harware included - Simple direct screwing Important...
795.00€ *
LOBA HP20 High Pressure Pump 2.0TFSI (EA113) Loba Motorsport HPFP high pressure fuel pump for 2.0 TFSi (EA113) Specific to 2.0 TFSI EA113 (Leon Cupra, Golf 5 GTi / Golf R, S3 8P etc.) Max pressure: 175 bar Perfect for 340 hp + setups on the 2.0 TFSI engine Hardware included Simply...
Content 1 Stück
775.00€ *
Injector Bosch 550ccm - 5 pcs Delivery: - 5 injectors original Bosch 550ccm at 3 bar high impedance Technical specifications: - 550cc / min at 3 bar - 12 ohms - Length O-ring to O-ring beginning 60mm - thick design EV14 - USCAR plug Suitable for: - For many German...
399.00€ *
Pop-off piston valve alu Delivery: - closed pop-off valve Suitable for: - All vehicles with air mass meter drive eg 1.8T, VR6, R32 etc. Important notice: This is an automatic translation. Please note that only the original german description is valid for a...
51.28€ *
Intake manifold 1.8T - Integrated Engineering 1.8T intake manifold for all transversely mounted 1.8T engines. They expect k can gro e increases when you bridge your original Ansaugrb exchange against the IE. The factory bridge is sufficient for the air supply into the engine duct to...
Content 1 Stück
1,011.50€ *
Tial MV-R 44mm TIAL MVR external wastegate with water cooling for turbo engines up to approx. 600hp. The MV-R Tial Wastegate has a valve with a diameter of 44mm. Both the housing and the valve are made of 347SS stainless steel to withstand the highest...
429.00€ *
Tial MV-S 38mm TIAL MV-S external wastegate with watercooling for turbocharged engines up to approx. 600hp. The MV-S Tial Wastegate has a valve with a diameter of 38mm. Both the housing and the valve are made of 347SS stainless steel to withstand the...
319.00€ *